Table Saw Cut Guide

Use this simple guide to align your cut mark and get an exact cut everytime.

How to Make It

Step 1

Cut a notch halfway through a short length of 1 X 3 and mark an X as shown.

Step 2

Rotate board 180° lining notch with saw guide and cut all the way through.

How To Use It

Lay end with X against miter fence, align cut mark with inside of notch, remove guide and make cut.

Hybrid Saws

The most innovative saws on the market. Jet hybrid Supersaws combine affordability with the most useful features of professional-class stationary saws.
JET - JWSS-10PF: NEW Contractor Tablesaw w/ 30'' Fence
JET - JWSS-10PF: NEW Contractor Tablesaw w/ 30'' Fence
JET - JWSS-10SPF: NEW Contractor Tablesaw w/ 30'' Fence & Sliding Table
JET - JWSS-10SPF: NEW Contractor Tablesaw w/ 30'' Fence & Sliding Table
JET - JWSS-10SPFX: NEW Contractor Tablesaw w/ 52'' Fence & Sliding Table
JET - JWSS-10SPFX: NEW Contractor Tablesaw w/ 52'' Fence & Sliding Table
JET - JWSS-CS-PF, CS Supersaw w/ 30'' X, Slid Tab
JET - JWSS-CS-PF, CS Supersaw w/ 30'' X, Slid Tab
WSS-10CSPF:1-3/4HP SS W/30
WSS-10CSPF:1-3/4HP SS W/30" XACTA FENCE